GATE VALVE, FLANGED, INFINITY
F5 DN40-300 PN10/16 bare shaft
Contact
BELGICAST International, S.L.
Polígono Industrial La Cruz Parcela P-4-1 48196 Lezama (Bizkaia) Spain
BELGICAST flanged gate valve INFINITY F5 DN40-300 PN10/16 bare shaft. Epoxy coating max temperature rate: -10°C to +50°C.
INFINITY represents a new generation of resilient seated gate valves, as well as boasting of the latest technological advances and unique technical features. INFINITY has been 100% designed and manufactured in Europe using high quality materials and the latest manufacturing technologies, to guarantee, to our valuable customers, an extraordinary lifetime, outstanding operability and unique safety features.
| Variant BC0140/104-001 | |
|---|---|
| Connection: | Flanged |
| Material: | Ductile iron |
| DN: | DN40 - DN300 |
| PN: | PN10/16 |
| Closing direction: | Clockwise to Close |
Features
- Low operating torque: INFINITY and its new wedge and stem technology ensures smooth functionality with outstanding low torque values.
- Longer service life: new guiding system for the wedge with male composite sliding skate in order to easily achievethe 2500 cycles endurance test required by European standards.
- Low head loss: clear way and straight bore design in order to allow a free path without restriction of the fluid.
- Bubble tight shut off: new wedge design with increased thickness of the elastomer at the sealing areas to improve tightness.
- High minimum resistant torque: Innovative design of the thrust system for minimum strength torque that exceeds current standards.
- Made of high quality materials according to the relevant standards.
- Clear way and straight bore, so the flow is optimum with minimum head losses.
- Replaceable packing under pressure.
- Three independant O-rings to guarantee the tightness throughout the stem. Two O-rings above the collar and one below (up to DN300).
- Patented three locking tab for bayonet system up to DN300, with clamping ring to avoid self dismantling, leakage and ejection risk.
- Innovative dust guard made of three O-rings integrated into one single piece that protects the valve from floods, salt spray and dust, and ensures full isolation (up to DN 300).
- Wedge fully encapsulated in elastomer for a better resistance to corrosion.
- Integral male composite sliding skate as guiding system for easy operation under maximum differential pressure.
- Body bonnet bolts are protected with hot melt glue.
- Stem in stainless steel.
- Maintenance free.
- Rounded surfaces of the body ensure a uniform coating and protection of the highest quality.
- Excellent corrosion resistance: GSK/RAL-GZ coating in standard up to DN300 with epoxy thickness of 250 microns minimum. Threadless bonnet up to DN300 that allows continuous coating.
- GSK approval as standard.
- Approved by major organizations worldwide for drinking water.
- In conformity with European standards EN 1074-2 (annex A) and EN 1171 (category 3).
- 100% tested according to EN 12166-1 standard.
- Free shaft. Designed to be operated by handwheel or square cap (T-key).
Downloads
Installation, operation and maintenance manuals
Product Catalogue
Reference nos. and dimensions:
Scroll for more info
| Reference no. | DN mm |
Flange drilling |
Theoretical weight/kg |
|---|---|---|---|
| RGV04710TS | 40 | 7.3 | |
| RGV04711TS | 50 | 8.8 | |
| RGV04712TS | 65 | 13 | |
| RGV04713TS | 80 | 15 | |
| RGV04714TS | 100 | 18 | |
| RGV04715TS | 125 | 25 | |
| RGV04716TS | 150 | 31 | |
| RGV04717TS | 200 | 54 | |
| RGV04718TS | 200 | 54 | |
| RGV04719TS | 250 | 79 | |
| RGV04720TS | 250 | 79 | |
| RGV04721TS | 300 | 115 | |
| RGV04722TS | 300 | 115 |
2D/3D drawings
Enquiry
Scroll for more info
Test/Approvals
- Hydraulic test according to EN 1074-1 and -2 / EN 12266 |
- Seat: 1.1×PN (in bar), Body: 1.5×PN (in bar).
- Listed approvals are only for general information, specific approval for each variant upon request.
- Approved according to ACS-France
- Approved according to KIWA
- Approved according to CSTB NF 197
- Approved according to WRAS-UK
- Approved according to DVGW
- GSK approved as standard
Standards
- EN 1074 part 1 & 2
- Face-to-face dimension according to EN 558, basic series 15
- Flange Drilling according to EN1092-2
