Needle valve

Needle valve is the right valve to use whenever pressure heads or flow rates need to be safely and reliably reduced and controlled. They are used for two main tasks:

• By restricting the cross-section, a change in flow rate, flow velocity and pressure is forced, which results in higher stress in the valve. The valve must therefore be designed so that potential cavitation cannot cause any damage whatsoever.

• To be able to control the pressure and flow precisely and finely, the control valve’s control characteristics must be as linear as possible over the whole operating range.

Thanks to their well thought out and tested design, Needle valves fulfil these requirements to the greatest possible degree and are therefore the ideal valves for numerous control tasks.

   CLICK HERE FOR MORE INFO 

   

Fluid: drinking water, raw water, air and control

Nominal Diameter (DN): from 100mm to 2000mm

Nominal Pressure (PN): 10 to 160

Medium Temperature: up to 70°C

Body material: ductile iron

Coating: epoxy, enamel or special

INTERACTIVE TALIS CATALOGUE 2023

Address Details

BELGICAST Internacional, S.L.
Bº Zabalondo, 31
48100 Mungia (Bizkaia) - Spain
Tel: +34 94 488 91 00
Fax: +34 94 488 91 25
belgicast@remove-this.talis-group.com